Matek Systems F722-STD FC Flight Controller with OSD Barometer Blackbox for QAV210 220 250 RC FPV Racing Quadcopter

Price:
US$49.99

Free Shipping

The product you want to order is in stock. All orders are delivered within 24 hours after they are placed.
Matek Systems F722-STD STM32F722 Flight Controller Built-in BetaFlight OSD BMP280 Barometer Blackbox

Features:
5x UARTs, 1x I2C1
7x PWM / DShot outputs without conflict
1x Side-press button for BOOT(DFU) mode
1x Group of G/S1/S2/S3/S4 pads for 4in1 ESC Signal/GND
3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator (Red)
4x pairs of corner pads for ESC Signal/GND connections (DSHOT compatible)
1x 16pin bottom mounted FFC Slot for FCHUB-6S or FCHUB-VTX connection

Specifications:
Brand name: Matek Systems
Item name: F722-STD flight controller
MCU: 216MHz STM32F722RET6
IMU: 32K ICM20602 gyro/accelerometer (SPI)
Baro: BMP280 (I2C)
OSD: BetaFlight OSD w/ AT7456E chip
Blackbox: MicroSD card slot (SD/SDHC)
VCP, UART1, UART2, UART3, UART4, UART5
PPM/UART Shared: UART2-RX
Battery Voltage Sensor: 1:10
Current Sensor: No (FCHUB-6S, FCHUB-VTX option)
BEC 5V: No (FCHUB-6S, FCHUB-VTX option)
Dimensions: 36 * 36mm PCB with 30.5mm mounting holes
Weight: About 7g
LDO 3.3V: Max.300mA
I2C1 SDA & SCL: Yes
Camera control: Yes
DAC: Yes
WS2812 Led Strip: Yes
Beeper: Yes
RSSI: Yes

Kindly reminder: 
There could be a few deviations due to manual measurement. Thank you for your attention

Package information:
Package size: 9.5 * 8 * 1cm / 3.75 * 3.15 * 0.39in
Package weight: 13g / 0.5oz
Poly bag package

Package included:
1 * F722-STD flight controller
2 * 16Pin 5cm Flexible Flat Cable
4 * M3 Anti-vibration Standoffs

The product you want to order is in stock. All orders are delivered within 24 hours after they are placed.