LED search light enables you to fly in the dark at night.
2.4 GHz technology adopted for anti-interference.
Detachable protective frame to reduce damages due to crash.
High/low speed switch, 3D-flip function and headless mode make your flight more remarkable.
5.8G real-time transmission FPV system with a 2.0MP HD camera which can capture photos and record videos for your great memory.
With one-key return function, the drone can find its way back home easily.
Fully charged 3.7v 380 mAh battery can support a 5 minutes stable FPV flight.
Newest 6-Axis Gyro control system ensures stable flight and easy operation.
Built-in 2.31 inches LCD screen atop the remote controller.
Brand name: MJX
Item name: X906T
Controller: 2.4GHz mode 2
Channels: 4 Channels
Function: Forward/backward, up/down, left/right, sideward flight, hovering, 3D-flip, headless mode, high/low speed, one-key return, FPV image transmission, photo taking and video recording
Remote distance: About 30m
Battery for quadcopter: 3.7V 380mAh li-po battery
Battery dimensions: 40 * 20 * 8mm
Battery weight: 10.8g
Charging time: About 50 minutes
Working time: About 5 minutes
Battery for remote controller: Rechargeable built-in li-po 3.7V 800mAh battery
Item dimensions: 110 * 110 * 35mm / 4.3 * 4.3 * 1.4in
Item weight: 38.4g
There might be some deviation due to manual measurement.
This RC model is not a toy and is not suitable for children under 14 years old, keep it away from children.
Carefully read the instruction manual before any use, if you are a beginner, it's advisable to be assisted by an experienced adult.
Caution for the battery:
Don't over-charge, or over-discharge batteries.
Don't put it beside the high temperature condition.
Don't throw it into fire.
Don't throw it into water.
Package size: 23.8 * 11.5 * 7.0cm / 9.3 * 4.5 * 2.8in
Package weight: 483g / 1.1lb
Gift box package
1 * MJX X906T Quadcopter (built-in camera)
1 * 2.4G Transmitter (mode 2, built-in 3.7v 800mAh li-po battery)
1 * 3.7V 380mAh Li-Po Battery
1 * Remote Controller USB Charging Cable
1 * Battery USB Charging Cable
4 * Spared Propellers
1 * 4GB Memory Card
1 * Card Reader
1 * Wrench
4 * Protection Frame Set
1 * English Manual
FAQ of the aircraft:
1. The aircraft fail to connect with transmitter.
First, battery fully charged, then power on the drone and the transmitter within 2 seconds.
2. One or more motors don't work.
When binding, drone on flat surface, or motor damaged.
3. Accessories missing.
Check gift box package inside and outside carefully, or contact custom service.
4. The aircraft is out of balance (can't fly, deviation, spinning on the ground).
Check the propellers is installed in the right way.
5. During the charging, battery and charging cable melt.
USB charger only for DC computer USB port, never for AC circuit and remember never over-charging